Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Compression on street tunnel ram
View Single Post
  #7 (permalink)  
Old 11-23-2007, 05:55 AM
383 383 is offline
Registered User
 
Join Date: Sep 2007
Location: SA
Posts: 13
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
On the street ram ,if a cam gets used that makes peak power above 7000rpm,
would it still make good power there? Edelbrock said its for under 7500rpm motors.
I would like to make 1.4-1.5hp per cubic inch.(383)
Can it be done with this setup? I need to choose the rotating assemblies compression and cam.
Reply With Quote