Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - consew 206 rb-5
Thread: consew 206 rb-5
View Single Post
  #2 (permalink)  
Old 04-25-2011, 03:41 PM
DanTwoLakes's Avatar
DanTwoLakes DanTwoLakes is offline
Hotrodders.com Moderator
 
Last wiki edit: Contact adhesive
Last journal entry: 49 Packard
Last photo:
Join Date: Apr 2006
Location: Lake Tomahawk, Wisconsin
Age: 64
Posts: 5,856
Wiki Edits: 22

Thanks: 0
Thanked 150 Times in 137 Posts
Stitching should be equally tight from the top and from the bottom. If the thread is straight on the bottom, the tension is too tight on the bobbin case, or the top thread tension is too loose. If the thread is straight on the top, the top tension is too tight, or the bobbin tension is too loose.

Look at page 13 of this Singer manual, it is explained very well: CLICK HERE
__________________
__________________________________

No one lives forever, the trick is creating something that will.
__________________________________

Last edited by DanTwoLakes; 04-25-2011 at 03:46 PM.
Reply With Quote