Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Control Arm Bushing
View Single Post
  #2 (permalink)  
Old 01-05-2013, 03:11 PM
BOBCRMAN@aol.com's Avatar
BOBCRMAN@aol.com BOBCRMAN@aol.com is offline
Member
 
Last photo:
Join Date: May 2002
Location: Holly, michigan
Posts: 8,117
Wiki Edits: 0

Thanks: 25
Thanked 266 Times in 249 Posts
Two ways. 1= Take them to machine shop. Where they will be removed.

2= Use a torch to set the rubber bushings on fire. Let them burn out. Then split and press the metal bushings out. Chances are that is what the machine shop will do. Thats what I've done for over 40 years.
Reply With Quote