Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Control Arm bushing replacement
View Single Post
  #5 (permalink)  
Old 03-14-2005, 12:06 AM
1Fast65Elky's Avatar
1Fast65Elky 1Fast65Elky is offline
Left Nut, Right Nut....Squish!
 
Last photo:
Join Date: May 2004
Location: California
Age: 32
Posts: 363
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
I used a hammer and a pipe the diameter of the bushing on 2, and the other side i used the help of a hydraulic jack, Redneck press
The jack worked better, but you run a good risk of bending stuff.

Bushings in the freezer sounds like a good idea Make em shrink.
Also seen someone mention in an old post to put vasaline on em.
Reply With Quote