|
|
|
10-03-2005, 04:20 PM
|
|||||
|
|||||
|
Control Arm contruction
What would be the best material to build control arms? tube or solid stock? also what about the 4 links? i was thinking i could use solid stock for those and drill and tap for the ends but the control arms would be tube so i could weld the ball joint housing on
Thanks Brendan 
|
|
10-03-2005, 04:26 PM
|
||||||
|
||||||
|
What kind of chassis is this..??
use tube for 4 links there are weld in pieces to fit the rod ends available or you can use the steel swedged rods from speedway.. control arms? are we speaking of a steering arm here..?? OMT
__________________
I have tried most all of it and now do what is known to work..
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| upper control arm 67 C10 | wickedwitchinak | Suspension - Brakes - Steering | 1 | 12-20-2004 09:47 PM |
| mustang 2 lower control arm bushings | nomaddaddy | Suspension - Brakes - Steering | 1 | 02-14-2004 12:28 PM |
| front end popping | maddmaxx | Suspension - Brakes - Steering | 4 | 11-15-2003 08:24 PM |
| poly lower control arm bushings | dusterbd | Suspension - Brakes - Steering | 2 | 11-13-2002 03:19 PM |
| Control Arm Bushings | clouddancer@attbi.com | Suspension - Brakes - Steering | 4 | 10-04-2002 07:26 AM |
