conversion

kylejohn · #1 (**permalink**) 01-20-2005, 10:51 AM

how hard will it be to switch from fmx to c6 and what will be needed to change

stu · #2 (**permalink**) 01-20-2005, 10:56 AM

First we have to know what vehicle, model, year, engine.
You know. That sort of stuff.
How difficult depends on your skill level.
To me it would be a walk in the park.

kylejohn · #3 (**permalink**) 01-20-2005, 11:02 AM

it is a 70 torino GT w/351c
am 16 years old little experience but my dad (40years experience) will help me

stu · #4 (**permalink**) 01-20-2005, 01:38 PM

Ok now another question.
Why do you want to change it?
FMX takes less power than a C6.
FMX is stronger.

kylejohn · #5 (**permalink**) 01-23-2005, 11:47 AM

because i need a bell housing for the fmx and i can get the c6 for free

stu · #6 (**permalink**) 01-23-2005, 11:51 AM

What do you have in there now?

kylejohn · #7 (**permalink**) 01-23-2005, 11:57 AM

i don't have anything in it now but it had a fmx in it before i bought it(I think?)

stu · #8 (**permalink**) 01-24-2005, 02:13 PM

You will need;
a flex plate,
starter,
dust cover,
probably have to rework the cross member and mount,
cut the drive shaft.
KD linkage.
For starters.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)