Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Convertible on rottiserie
View Single Post
  #18 (permalink)  
Old 11-18-2012, 09:38 PM
outlaw17's Avatar
outlaw17 outlaw17 is offline
Member
 
Last photo:
Join Date: Jan 2003
Location: C-eh N-eh D-eh
Posts: 168
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Thanks for all the good advice guys, the floors weren't really all that bad, just the common areas below the feet, the rockers are solid, no visible rust, I have no idea what the original 1/4's looked like because it has a pair partially welded ones already on as we'll as partial outer wheel houses but they left the rusty inners on it so I spliced in the inners, boy was that not fun. I recently did a 68 Camaro and while it was on the rotisserie I did the 1/4's, wheel houses, floors, rockers, trunk floor and drop offs and the thing never budged,the only bracing I had was from front to back of the door jambs, but being that this one is a convertible I felt it may need some help.
__________________
***** GO OILERS GO *****
Reply With Quote