Hot Rod Forum banner

corvette re/trans info

812 views 0 replies 1 participant last post by  reegeemon 
#1 ·
purchased patrially finished mcburnie conversion to 76 corvette. came w/ls6 and th200r4.

have converted to 4.11 re, (good launch in 1st, odrive in 4th w/lockup)

having trouble w/trans and speedo. trans is erratic, have installed shift kit and lockup kit from tci. still not good. have adjusted the throttle position cable from one end to another, 1 notch at a time. still no good.

would rather make this trans work, if possible.

also speedo is way off, (was 3.36 gear) any help with this also.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top