|
|
|
04-11-2009, 07:47 PM
|
||||
|
||||
|
Crane Cam ID help...
Hello, new to the site, very nicely done. Of course, I found it on accident, since I couldn't find the darn number for a Cam. I think its a crane, and I am worried their tech line might fade away soon with the company closure. Anyone with an old catalog please save me: The cam has two numbers stamped on the end: 119516 and 961710. The grinded number is 118521. Now this last number 118521 is listed with Crane, but as a grind number instead of a stamped part number. Anyone that can help, I would greatly appreciate it. I am thinking the cam was bought early to mid 1990's.
Thanks much Glenn 
|
|
04-11-2009, 08:54 PM
|
||||||
|
||||||
|
http://www.cranecams.com/?show=brows...tType=camshaft
This maybe what you were referring to so sorry if it comes as no help.
|
|
04-11-2009, 09:11 PM
|
||||
|
||||
|
Yes sir. That was in fact what I found. That shows that the grind number should be SR-244/362-2S-12 IG, yet the grind is 118521. The lifters that came with this lightly used cam appear to be Crane Pro-series mechanical lifters. Thanks for pulling it up for me. Any further help is greatly appreciated.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| old crane cam catalogs | Sleeve396 | Engine | 19 | 12-25-2010 07:59 PM |
| will this cam work well? | STLrocker | Engine | 11 | 03-29-2009 08:39 PM |
| Cam break-in and zinc | Frisco | Engine | 34 | 03-13-2007 08:22 PM |
| 383 Rod & Cam clearance | crusherdbuzz | Engine | 9 | 11-12-2006 06:17 PM |
| 274 crane cam | 78 chevy truck | Engine | 8 | 03-17-2004 04:46 PM |
