Hot Rod Forum banner

Cruise Control Wiring

2K views 3 replies 3 participants last post by  docvette 
#1 ·
I've got an '86 El Camino with a dealer-installed cruise that doesn't work because I've disconnected the computer.

I bought an almost complete cruise control set-up from a '79 Elky off Ebay. It's one of the last years for the "dumb" (non-computer) cruises. It also has a dash-mounted on-off switch instead of on the stalk.

I perused my trusty references and they only show the basic wiring. I can't find a source for accessory wiring, i.e. cruise control.

Anyone know of a source for this info?

(PS: I've also left a similar query on the El Camino board, but I'm afraid I'll die of old age before I ever get an answer there!)
 
#4 ·
Doc here, :pimp:

The Cruise Control Diagram can be found in a Factory only type manual...

Try a Call to your local main library, and see if the reference Department has these .. (ours Does..)and If not could they be outsourced by another system for you..

You'll probably have to copy it there as they usually don't let reference material out..

Doc :pimp:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top