Cutting out sail panel rust....
I dug out an area on the drivers side sail panel that was filled with Metal 2 Metal, underneath are a few rust holes and some pitting. What would be the best way to repair this besides new quarter? I thougt about cutting around the section untill I got to good metal then weld some 16g? sheetmetal in. Is it a bad idea to cut on the sail panel, I plan on staying away from the lead seam.
Heres some pics -
Your links don't work.
|All times are GMT -6. The time now is 09:24 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.