Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Cylinder head porting Shop
View Single Post
  #14 (permalink)  
Old 01-06-2012, 06:11 PM
joelster joelster is offline
Registered User
 
Last photo:
Join Date: Jul 2011
Location: tonawanda, ny
Posts: 237
Wiki Edits: 0

Thanks: 0
Thanked 4 Times in 4 Posts
Quote:
Originally Posted by engineczar
There's plenty of real good guys out there. Depends on how deep your pockets are.

Al Neal, Darren Morgan, Larry Meaux, Carl Foltz

http://www.cferacing.com/
^^^all top notch guys.

Also Eric Bradby, Chad Spiers.

Darren Morgan would be my go-to guy if I were building a large cube big-block. He is a wizard at 500 cube pro-stock engines. For a sbc I would go with Larry Meaux or Chad or Eric. Don't forget some good shops that have specialty cnc programs available for whatever head you have. You'll save a lot of money going that route. Try advancedinduction.com and see what cnc programs they have available.
Reply With Quote