|
|
|
09-30-2011, 07:35 PM
|
||||||
|
||||||
|
Dana 44 from a Vette - in a 27 T Roadster
I have access to a Dana 44 IRS from a Vette real cheap. Free! Originally I was going with a venerable Ford 9", a pair of 60" ladder bars, and coil overs. Mucho $. I was thinking of using the same basic setup but do it with the IRS. I cannot claim originality on this one. There is a picture of a T pickup with a Hemi and Corvette IRS floating around the internet(I believe it's sporting ladder bars too) If I can find the pic I'll post it here.
Anyone got any ideas of the pitfalls I might run into doing this. Any comments, ideas are welcome 27TRG 
|
|
09-30-2011, 08:36 PM
|
|||||
|
|||||
|
vette rear.
A lot of vette irs's got swapped. You just have to match the springs for the T. and mounting brackets and wishbones hair pins or 4 bars for the rear.
|
|
09-30-2011, 08:42 PM
|
|||||
|
|||||
|
vetter picts and info
Check out 29fordhotrod.com info on using a vette irs ..I have a 29 roadster and looked at the build picts a while back.
|
|
10-01-2011, 07:46 AM
|
||||||
|
||||||
|
moving to suspension forums
__________________
At the Bonneville Salt Flats, first gear is known as 130 mph.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| dana 60s | mudmonster | Suspension - Brakes - Steering | 0 | 06-25-2010 02:32 PM |
| Vette Dana 44 or Cobra 8.8 Rear | 123pugsy | Transmission - Rearend | 22 | 02-24-2010 10:48 AM |
| Possible dana 60-70?? Can anyone help ID | eatonde | Transmission - Rearend | 14 | 12-11-2008 02:52 PM |
| What is the difference between a Dana 60 and a Dana 61 | onebadmerc | Transmission - Rearend | 1 | 09-20-2008 07:22 PM |
| Need 3.54 R&P for Dana 60! | billybob_v10 | Transmission - Rearend | 2 | 02-21-2004 07:51 AM |
