Where can I get a ring gear spacer for a Dana 60 ring gear? I am changing from a 4:10 gear over to a 4:88 or maybe 5:13 depending on the size tires I go with. Can't find any so far.

Thanks!
Brian
turbo@esn.net

you shouldn't need a spacer for this change, spacers are usually needed only when changing from a three series carrier to a four series gear. had a dana 60 in my old gasser ran 513-586 gears on a carrier that was from a 440 gtx mopar, originally a 4:10 car.

[ November 10, 2002: Message edited by: BOBCRMAN@aol.com ]</p>