Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Demon carbs lean at transition
View Single Post
  #1 (permalink)  
Old 03-31-2013, 02:00 PM
Blown Camaro Blown Camaro is offline
Registered User
 

Last journal entry: Before the 6-71 cometh
Last photo:
Join Date: Jul 2011
Location: Deltona,FL
Posts: 57
Wiki Edits: 0

Thanks: 1
Thanked 1 Time in 1 Post
Demon carbs lean at transition

I got my AEM Failsafe hooked up and it works great. Easy to read display even in sunlight. Anyway, have some questions:
I am running a 6-71 blower with 2 Demon 650 double pumper blower carbs.

Idle AFR is 13.0 and nice and smooth at 1000 RPM

>>> In Neutral <<<

Bring the RPM up to 2000 and it reads 12.5
Bring the RPM up to 2500 and it reads 15.5 and the engine is missing
Bring the RPM up to 3000 and it reads 12.7 and smooths out again
Okay, where do I start? I am very good with carbs so lay it on me. I am thinking idle air bleeds are too big?
Reply With Quote