Does anyone have a desk-top dyno?I could post all engine specs if someone would give me a base-line of power thanks

let's see them, I have dyno 2000

hey I will send them let me get em all wrote down and posted thanks
maybe 10 min.

the engine is a sb chevy 400
bore:4.185
stroke:3.750
rods are 6" h beam
pistons are forged 10.5 compression
0 deck height
cam is a crane hydraulic roller with a 539"intake 558"exhaust lift
valve setting:Intake .000 Exhaust .000
Lift Intake @cam 359 @valve539
exhaust@cam 372 @valve 558
rocker arm ratio 1.50
Cam timing:tappet @.004
lift: Intake opens 35.0 BTDC
Intake closes 77.0 ABDC
adv. duration 292 degree
Exhaust opens 83.0 BBDC
Exhaust closes 37.0 ATDC
adv. duration 300 degree
Cam Timing: tappet @.50
lift: intake opens 8.0 BTDC
intake closes 42.0 ABDC
max lift 107
duration 230 degree
lift: exhaust opens 56.0 BBDC
exhaust closes 2.0 ATDC
max lift 117
duration 238 degree
rpm is 2800-6500

the lifters are fully roller retro fit
the heads are aluminum made by jegs high performance
197cc intake runners
2.05 intake valve
1.60 exhaust valve
the springs are 1.440

the rocker arms are fully roller aluminum 1.5 ratio

The intake is a victor junior open plenum 3500-8000

the carb is a 750 double pumper
well here are the specs thanks for doing this

I came up with 514hp @ 6500 rpm and 487 ft ibs @ 4500. But remeber these are not exact figures.