Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Suspension - Brakes - Steering (http://www.hotrodders.com/forum/suspension-brakes-steering/)
-   -   Dimensions of 57 Ranchero/Fairlane center link? (http://www.hotrodders.com/forum/dimensions-57-ranchero-fairlane-center-link-218329.html)

Mutt's37Buick 04-19-2012 02:26 PM

Dimensions of 57 Ranchero/Fairlane center link?
 
1 Attachment(s)
I've been searching for a center link that will work when I convert my '37 Buick to a power steering gearbox.
I'm not going to use a rack & pinion because my spindles require 7 inches of throw and I have not found a center take off r&p with this much throw.
I found a picture of a 57 Ranchero/Fairlane center link that looks like it may work. (see attached)
I know it's a lot to ask, but does anyone have a stock 57 thru 59 Ranchero/Fairlane that that they could measure two lengths on the center link for me:
1) distance between inner tie rod attach centers?
2) distance between pitman arm attach to idler arm attach centers?
Thanks for your help.
Mutt

Mutt's37Buick 04-19-2012 06:11 PM

1 Attachment(s)
I did not describe dimensions very well. See the attached.
The dimensions I'm looking for are Dim A and Dim B on the drawing.
Thanks
Mutt

Mutt's37Buick 04-20-2012 09:51 AM

In case anyone was interested, the dimensions were give to me as:
Dim A = 5", Dim B = 36"
Thanks
Mutt


All times are GMT -6. The time now is 06:38 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.