Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - disassebled sbc help
View Single Post
  #1 (permalink)  
Old 12-13-2012, 12:18 PM
s-10again! s-10again! is offline
Registered User
Join Date: Nov 2012
Location: upstate New Yorkistan
Age: 31
Posts: 132
Wiki Edits: 0

Thanks: 0
Thanked 5 Times in 5 Posts
disassebled sbc help

i got my uncle a great running 350cid 260 hp marine engine to build for a 69 nova he was going to build. he got the rolling car built and then disassembled the engine with intentions on 400 hp. at that point he lost his health and lost a battle with cancer a year and a half later. at that poin the engine was offered back to me by his sons(my cousins) who put a machinist build 454 in the car and painted the car the way their father had dreamed of. the bad part is the engine was going to the machine shop so the marine steel crank was oiled in a bag, and the lifters trashed, and the rods still attached to the pistons dipped in used deisel oil, and camshaft shelved, nothing marked. i would LIKE to reassemble this engine cheaply for a buddy of mine for christmas, that is down on funds and runs a tired old 88 C 1500 that he dreams of restoreing. i want to know how i would find out where these rods and pistons went. i do not want to spend 1800 bucks line honing and boring block, recamming and reconditioning rods and new pistons whene this engine would have had another 200,000 miles hiding under its carb. i wouldnt put this engine back together withought plastigaugeing it with new bearings and new piston rings but that is 300 bucks worth spending. how much life could i expect from the cam if i put 16 new lifters on it? also in speculation, how relieble could this engine be if the rods were to not make it back to their origional cylinder? what is the bottom line here?
Reply With Quote