Hot Rod Forum banner

Disc brake conversion on a 1931 ford model a

11K views 1 reply 2 participants last post by  Restore60s 
#1 ·
Just bought a 1931 model a sedan (5 window) and would like to install power disc brakes on the front. (already have a rear axle with drum brakes for rear) Does anybody know if there is a bolt on kit or any donor parts that will work? And also what master cylinder would work best with this set up. The frame and suspension is all original at this time. This will become a street rod after it is put back together. Thanks for all the help
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top