Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Disc Brake Conversion
View Single Post
  #1 (permalink)  
Old 10-15-2007, 04:18 PM
Registered User
Join Date: Jan 2007
Location: california
Posts: 4
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Disc Brake Conversion

I just converted my 1973 ford Maverick to front disc brakes. I found I had 2 choices for a master cylinder. The original type manual drum or Power front disc. I dont have power but went with that Master. I now have no braking power at all, The brakes are real spongy. I have them bled and the rear drums adjusted but I still cant lock up. Do I have the wrong type Master. I reflared my lines to fit this one and I am not sure which one to try next. Do they make a master that is manual disc? I have not been able to find a part number for such an application.
Reply With Quote