Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - diy masking station ideas?
View Single Post
  #3 (permalink)  
Old 03-05-2013, 01:36 PM
Larry123 Larry123 is offline
Registered User
 
Last photo:
Join Date: Apr 2011
Location: Nor-Cal
Age: 53
Posts: 29
Wiki Edits: 0

Thanks: 1
Thanked 4 Times in 3 Posts
Here is a picture of mine, I made it back in high school about 35 years ago. This is before the days of cheap stuff from China so I bought the rollers and tensioners from the local paint supply and built my own frame. If I remember correctly i used two hacksaw blades pop riveted together but at a later date I replaced it with a section of band saw blade. The tensioner for the blade is a hacksaw cut in two welded to the frame.
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	319
Size:	1.94 MB
ID:	72074  
Reply With Quote
The Following User Says Thank You to Larry123 For This Useful Post:
John long (03-05-2013)