|
|
|
03-03-2004, 07:14 AM
|
|||||
|
|||||
|
Do I need to sand phosphoric acid?
I have a 1972 Ford F100 that I am repainting. I have removed the radiator support to do some work on and am going to paint it. I put some phosphoric acid on it so that it wouldn't rust until I go to it. Do I need to sand it or can I just prime and paint right over it.
Thanks, Bob 
|
|
03-03-2004, 07:44 AM
|
||||||
|
||||||
|
Take a stainless steel brillo pad and go over it with that to remove as much a possible. Then wipe it down with some sort of solvent. The cleaner the part is the better.
|
|
03-03-2004, 07:51 AM
|
||||||
|
||||||
|
I've found a brillo pad with detergent and a clear water rinse followed by primer works best after phosphate
|
|
03-03-2004, 08:43 AM
|
|||||
|
|||||
|
I just wipe it several times with wash thinner.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
