![]() |
Hotrodders Bulletin Board
Home · Bulletin Board · Project Journals · Tech Article Wiki · Knowledge Base · Photo Gallery · Classifieds · Company Reviews · Calendar · T-Shirts |
|
||||||||
|
|||||
![]() |
|
|
Thread Tools | Search this Thread |
|
#1
|
|||
|
|||
|
Does anybody own 84-88 monte carlo?
Does anybody own an 84-88 stock monte carlo, or at least a monte carlo that has all the vacuum hoses hooked up to it? If so could I possibly ask one of you people out there to pull their air cleaner off of the quadra jet and get some pictures for me of the front, sides and rear so I can re-hook up all the vacuum hoses plz?
I got a diagram for an 84 monte W/305 from a gas station, and it doesnt even look like the right emissions diagram to me. Half the vacuum hoses werent even in the diagram. Thanks. |
|
#2
|
|||
|
|||
|
re: Does anybody own 84-88 monte carlo?
I have an 87 Monte and when i rebuilt the top end i lost the place of all of those also. If you get a Haynes book in most of the pictures you can get a good idea where they all go. My quad was junk so i just put a 670 Holly Street Avenger on it. I just ripped the whole computer out (to many wires and sensors) works good now. Emissions aren't that great now ha,ha. Good luck!!!
|
|
#3
|
||||
|
||||
|
re: Does anybody own 84-88 monte carlo?
I have "Mitchell on Demand" and can get a pic of the vac hose if you still need it. Is it Fed or Calif emissions?
|
|
#5
|
|||
|
|||
|
re: Does anybody own 84-88 monte carlo?
It's not callifornia and I need a proper diagram of the routing, the quadrajet has vacuum ports on the base plate, mid section and the top plate so it makes it extremely difficult to follow a 2D diagram.
Last edited by 87442lover : 01-27-2004 at 10:24 PM. |