Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Suspension - Brakes - Steering (http://www.hotrodders.com/forum/suspension-brakes-steering/)
-   -   dropped spindles (http://www.hotrodders.com/forum/dropped-spindles-219077.html)

rusty duck 05-06-2012 10:54 PM

dropped spindles
 
Does anyone sell 1" dropped spindles for the mustang II IFS?

timothale 05-07-2012 06:23 AM

yes
 
google mustang II parts . check speedway and other vendors

rusty duck 05-07-2012 11:42 AM

dropped spindles
 
I have checked, speedway, summit, bob drake, tci, and they only carry 2" or 4" dropped spindles. Maybe they don't make 1" dropped spindles anymore, but I know I have seen them advertised in the past, but can't remember who the vendor was. Any help is appreciated.

Cape Cod Bob 05-07-2012 08:27 PM

Why 1 " ? :welcome:

rusty duck 05-07-2012 11:07 PM

dropped spindles
 
I have a 1937 ford coupe and the nose of the grille can only come down 1" from where it is now without being too low and hitting speed bumps, etc. 1" would get me to where I want to be.

cobalt327 05-08-2012 12:25 AM

One inch drop is in the "cut a quarter coil at a time till you get it right" category (more or less, depending on the weight on the spring and the spring rate), IMHO.


All times are GMT -6. The time now is 04:54 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.