dyno...???
 

yes i would like to know how many hp this engine combination would be making...???

350 sbc 4 bolt main... bored 40 over...3.48 stroke...

performer rpm intake...

600 cfm carb...1 inch open phenolic carb spacer...

long tube headers...3 inch pipe...flowmaster super 40...

procomp cylinder heads...210 cc runner size...64cc combustion chambers...
2.02 intake and 1.6 exh valves...

hipereutectic flat top pistons...10:3.1 compression ratio with 64cc...

double roller timing chain...

280 comp cam... .480 intake and .480 exh lift... @ .050 lift- 230


dyno simulate plz...

Looks Like

Torque 430@4000
HP 369@5700

I would say this is probably optimistic I didn't have any flow numbers for procomp so I substituted for some canfield heads that I am sure are better.