Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - E force pulleys for more
View Single Post
  #1 (permalink)  
Old 09-10-2012, 11:08 PM
spinn's Avatar
spinn spinn is offline
Reviewing the situation
 

Last journal entry: This makes a huge difference
Last photo:
Join Date: Oct 2004
Location: here
Posts: 2,555
Wiki Edits: 0

Thanks: 14
Thanked 88 Times in 85 Posts
E force pulleys for more

I heard magnuson makes press on pullies for the carburetor Edelbrock E force superchargers. After a search or two my efforts are fruitless. They seem to be for other systems. Would pulling the driven off damage the shaft? Does anybody make a 4 bolt -on style conversion like the other e force kits?

My 305 is at 5+ psi at 5200 rpm. Looking for a 3.35" to get about 8 psi by that rpm. Then it can take advantage of the MSD BTB retard. The boost ramps up with rpm mildly and the sneeze valve is good protection not on the other roots blowers. It is silent too which is likeable.

Very impressive for a 305 with a performer cam. Most impressive.
Reply With Quote