Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Edelbrock 2102 cam timing in 350
View Single Post
  #1 (permalink)  
Old 09-10-2012, 08:40 PM
rlb3's Avatar
rlb3 rlb3 is offline
Registered User
Last photo:
Join Date: Jan 2011
Location: texas
Posts: 44
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Edelbrock 2102 cam timing in 350

I have a new edelbrock 2102 cam/lifters set to go in a 91 c1500 350 tbi block. in the instructions it says "INSTALLATION NOTES: Use Performer-Link Timing Chain and Gear Set, #7800. Do not use late model timing sets. They are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Performer-Link True Rolling Timing Sets feature three keyways for specific timing selection. Always use the or straightup timing mark when installing Performer-Plus camshafts with Performer-Link Timing Sets." I already have a new cloyes timing set. If i set the dots on the gears straight up and down with each other will the timing be correct? If not can someone tell me where to set the gears at? Thanks
Reply With Quote