Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Edelbrock carb: Metering rods & jetting appropriately for altitude
View Single Post
  #2 (permalink)  
Old 01-01-2009, 05:57 PM
Rhansen's Avatar
Rhansen Rhansen is offline
Footbraker
 
Last photo:
Join Date: Jan 2004
Location: Davenport, Iowa
Age: 45
Posts: 584
Wiki Edits: 0

Thanks: 3
Thanked 5 Times in 5 Posts
IIRC when over carbing an engine you would want to jet richer to compensate for loss of signal (air velocity). Now a 750 doesn't sound like way too much carb for a healthy 350 but you might want to consider running the secondary side a little richer to avoid being too lean at WOT.
Just my $.02
Reply With Quote