|
I will be home in a few days i will post pictures when i get them torn down and cleaned up and ready for porting. Was thinking i could soak them in varsol for a day then pressure wash them. A few guys i have talk to have machined the spring pockets to accomodate 1.46 springs. As for a cam i was going to run Howards retro CL110245 225/231 @50 500/512 lift 112 lobe separation. I'v herd the estreet springs are not the best so i will see what Howards recomends for springs with that cam. As far as valvetrain i was thinking roller tip rockers from comp or howards havent decided yet.
|