Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Edelbrock performer and carter carb help
View Single Post
  #1 (permalink)  
Old 01-19-2010, 06:13 PM
ad forever's Avatar
ad forever ad forever is offline
New Member
 
Join Date: Sep 2003
Location: Minden Ontario Can
Posts: 21
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Edelbrock performer and carter carb help

Can any one give me some info.
I have installed a edelbrock performer intake on my 350 chev and I am mounting a carter AFB 625 cfm carb onto this manifold.I am really new at this and I dont know if I should be using a carb spacer or not.The carb base is to narrow when I put it on the manifold and there is a narrow gap on each side of the carb into the manifold. Is there a certain spacer I should be using.Thanks in advance.
Reply With Quote