Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Engine (http://www.hotrodders.com/forum/engine/)
-   -   eldelbrock street tunnel ram 7110 flow chart (http://www.hotrodders.com/forum/eldelbrock-street-tunnel-ram-7110-flow-chart-228574.html)

Fang16 01-19-2013 10:54 AM

eldelbrock street tunnel ram 7110 flow chart
 
Anybody have any flow numbers or other specs for a eldelbrock street tunnel ram model 7110? We don't need to get into all the different carb sizes etc just looking for some flow numbers for the manifold.

F-BIRD'88 01-19-2013 01:45 PM

You will not find published flow numbers for a intake manifold and you cannot and shoulding build your engine
around a flow number anyways. if you want a flow number you will have to test for yourself.
Best tested while attached to the cylinder head you will be using- combined on the flow bench . Compare to other manifolds the numbers are interesting to look at but are not absolute. Don't worry this manifold flows big and will make big horsepower.

When you get your tunnel rammed motor project done, post your results.


All times are GMT -6. The time now is 09:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.