Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Engine issues...
View Single Post
  #1 (permalink)  
Old 12-30-2005, 11:49 AM
Ozz1967's Avatar
Ozz1967 Ozz1967 is offline
Air Force Guy
 
Last photo:
Join Date: Aug 2004
Location: Layton, Utah for now, somewhere else later.
Age: 37
Posts: 260
Wiki Edits: 0

Thanks: 0
Thanked 1 Time in 1 Post
Engine issues...

I just got a call from the machine shop that's doing the work on my motor. He FINALLY got back from vacation and though I said the block was good earlier, I was really hoping and praying that it was. Now I know for sure! YAY. However, the bearings were spun on pistons 1 and 3 so badly that he can't turn the crank to fix it. So, now I have a dilemma.

Do I...stick with the stock size crank, or go ahead and get one with a longer stroke? Then do I buy a cast or forged? And if I do that, do I go ahead and have him punch it out .30 over?

What benefits will a 383 give me over a 350 or even 377 (Stroked but not bored). Thanks.
Reply With Quote