Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - engine swap 36 cord to GM V/8 FRONT WHEEL DRIVE
View Single Post
  #2 (permalink)  
Old 07-15-2012, 11:21 AM
OneMoreTime's Avatar
OneMoreTime OneMoreTime is offline moderator
Last wiki edit: Health and safety in the shop or garage
Last journal entry: Yard Dog pic
Last photo:
Join Date: Jul 2004
Location: Washington State
Age: 72
Posts: 8,841
Wiki Edits: 3

Thanks: 220
Thanked 459 Times in 410 Posts
Lets move to general rodding tech...Now to answer some of the question..Once you settle on a donor but the whole car as those late models are electronic and you will need all the cpu's and wiring harness as well as the engine and trans..Not usre on the late GM stuff but most fwd cars mount the engine trans and suspension on a cradle which is then attached to the car so you will need to have the whole cradle and transplant all that as a unit into the Cord..Measure measure measure and take some trips to the pick-a-part with camera and tape measure to see just what is what and what may work for you in that app..

I have tried most all of it and now do what is known to work..
Reply With Quote