[elsanyo]

well its almost spring and the tax man was generious. so now I want to do more with my engine .Present combo is a 351w .30 over with stock rods and pistons,Edelbrock performer with a 750 Holley carb,Roush 200 World Product heads,Comp cam xe 4x4 226-234 w/512 lift and a 111 L/s ,Crane gold roller rockers 1.6 ratio,Duraspark with MSD ign.,Headman long tibe headers . Looking for more h/p or torque it dosn't matter. I would like some suggestions on upgrading. Ihave a c6 with 2800 stall and a 9 " with 4.11 and a detroit .My draw back is my weight 4200 lbs. HELP

[n2o burner]

If I were you i would build the bottom end of my engine and try to improve the torque so that it will be a little easier to get that beast rolling.

[elsanyo]

well I have been advised to change my intake to an weiland stealth and advance my cam timing 4deg..does this sound reasonable?also was told to go with the bottle (maybe a 75 shot)

[ap72]

Well, since it is a 351W and you want torque... stroke it baby!

An intake will help a little, and NOS is always fun, but there is nothing like the low end grunt given by a longer crank throw.