Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Hotrodding Basics (http://www.hotrodders.com/forum/hotrodding-basics/)
-   -   Exhuast ? (http://www.hotrodders.com/forum/exhuast-222179.html)

compajosh 07-26-2012 11:22 PM

Exhuast ?
 
Hi guys this should be easy I have a 73 impala with a 383sbc 350-375hrs/ 400fbls of torque. My car has 2 inch pipes,would this be to little back pressure or to much; I was going to run straight pipe with no mufflers on my 2 inch pipes.I have headers on it to with 3inch collectors. Like to no what u think thanks.:confused: and if the 2inch would work should I add a cross pipe?

cdminter59 07-26-2012 11:41 PM

Exhaust
 
Here is some material to read. It may help in your decision on your exhaust size.How To Calculate Muffler Size and Exhaust Pipe Diameter | Exhaust Videos

compajosh 07-26-2012 11:49 PM

Cool beans that helped alot thanks brother. I should be ok with 2 1/4inch pipes then!

bigdog7373 07-27-2012 04:24 PM

I say 2.25” smallest on a v8 no matter what size. Any smaller causes too much back pressure and weird sound. For your 383 i'd get 2.5".


All times are GMT -6. The time now is 05:10 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.