Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Fed-Mogul Speed-Pro hydr roller retrofit cam?
View Single Post
  #12 (permalink)  
Old 10-20-2004, 11:03 AM
machine shop tom machine shop tom is offline
King of my Man-cave.
 
Last photo:
Join Date: Nov 2003
Location: Michigan
Age: 55
Posts: 2,901
Wiki Edits: 0

Thanks: 4
Thanked 16 Times in 13 Posts
I have a tech line that I call to get their cam card specs. However, I can't give that number out. Perhaps if you call your local parts store, you can give them your part number and they can call for you and have the specs faxed to them.

tom

[QUOTE]Originally posted by pgtr
[B]Indeed - thanks Tom!

In re-reading their online specs and your post I may be mis-understanding their terms. They include "Lobe CL" in their specs. I presumed that was intake Lobe Center. Is it that or is it Lobe Separate Angle?

These all four 'retrofit' hyd rollers they offer and am researching...

CS1061R Pro-2K (Lobe CL 112, 273/288, .433/.462)
Intake C/L 108
CS1070R Pro-3K (Lobe CL 110, 288/284, .462/.470)
Intake C/L 106
CS1071R Pro-5K (Lobe CL 108, 306/306, .480/.480)
Intake C/L 106
CS1073R Pro-3K (Lobe CL 104, 275/275, .458/.458)
not listed
QUOTE]

Those look like Elgin grinds. However, the Elgin website is down. But I have an old catalog. I have added the Intale C/Ls to you list above. Elgin's phone # is 1-800-323-6764

tom

Last edited by machine shop tom; 10-20-2004 at 11:03 AM.
Reply With Quote