Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Few questions on a 350 sbc build up...
View Single Post
  #4 (permalink)  
Old 07-15-2012, 09:12 AM
vinniekq2's Avatar
vinniekq2 vinniekq2 is offline
Registered User
 
Join Date: Jun 2012
Location: BC,Canada
Age: 56
Posts: 7,707
Wiki Edits: 0

Thanks: 309
Thanked 742 Times in 713 Posts
estimate

My estimate might be fairly accurate for your application.The engine I took out of my 1981 vette was 030 over 350 with a holley street dominator manifold,modified 650 holley DP with 850 baseplate,420 lift 198/208 @ 050 cam,small tube headers.The engine was built by professional builder Jack Muzzomo. Chasis dyno tuned on a dyno jet it put down 205 HP at 4500 rpm and torque peaked just under 280.
with 2.73 gears the car was not spectacular. I now use 3.50 gears and a stroker engine.
Reply With Quote