Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - finding a 400sbc
View Single Post
  #15 (permalink)  
Old 12-21-2002, 08:05 AM
Pinardi Pinardi is offline
Join Date: Oct 2002
Location: Ft. Mohave, Az.
Posts: 30
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts

Gee, I put a 1970 400 4-bolt in my 68 Camaro 6 months ago, the crank and heads are mounted with ARP studs, it's got an Eagle 4340 crank, Eagle 6" H-beam rods, an ATI super dampner on the snout, J&E forged pistons,Edelbrock Victor Jr. aluminum heads w/2.08 Int. a Crane solid roller cam/rockers and stud girdles,Victor Jr. intake with a holley 830 carb,it's fired by a locked out Mallory magnetic pick-up dist and Hyfire VII ignition, it's a 4-speed car with the rev limiter set at 7200 RPM's (it' been there several times !) it's a lot of fun and runs like a watch, too bad I'm driving a time-bomb!!!
Reply With Quote