fitting sbc engine in 50 chevy truck
I'm having problems fitting my SBC into my 50 chevy truck. I have a 700 R transmission and I cut the bottom of the firewall 1 inch but still not enough room for the distributor and the crank pulley lacks 1 inch from clearing the front crossmember. I could cut the firewall more so the trans. goes back another inch, but I think I still won't have enough clearanc for the dist.
Any ideas short of cutting out for the distributor and boxing in?
|All times are GMT -6. The time now is 02:52 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.