Originally Posted by butchfig8
FMC 9909 Allignment machine
program hangs up in run out mode while setting up
Thing is old, Comm to heads says Ok, but see no data from heads.
Has any body used the FMC 9909 Allignment machine ??
I've got a 7909 visualiner I use fairly often (home shop) - basically the same as the 9909 but a smaller cabinet.
I've had good luck getting parts and service advice from a SnapOn guy in Canada - RAL Sales <firstname.lastname@example.org> - his name is Roy, tell him that David Raistrick sent you. (FMC was also John Bean, which got absorbed into SnapOn..)
(none of the local service reps would even talk to me - I did find a guy in Miami that has parts, too, if you can't get what you need from Toy. And another in Tampa, but he was an *** to deal with...)
I've got mostly a full complement of documentation for these 3rd gen (I think..) Visualiners - but haven't managed to get my hands on the real service manual yet. If you need anything let me know and I can get it scanned in.
I also have a half written set of detailed calibration and adjustment instructions (mind you, you have to have the calibration bar and stands.) that I could finish up....