Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Ford 460 intake questions
View Single Post
  #2 (permalink)  
Old 10-14-2012, 11:36 PM
techinspector1's Avatar
techinspector1 techinspector1 is online now
Senior Curmudgeon
 
Last wiki edit: DynoSim combinations Last photo:
Join Date: Oct 2005
Location: Hemet, California, USA
Age: 72
Posts: 12,564
Wiki Edits: 326

Thanks: 699
Thanked 878 Times in 746 Posts
Quote:
Originally Posted by rickpilgrim View Post
I have a 86 460, freshly rebuilt with a Howards RV cam(213 degrees @ .050, .502 lift,111 lsa, 106 centerline) 2.19/1.88 valves bowl blended and port matched, 8.5/ 1 comp, HEI style ign, arp hardware but otherwise stock and will be used for towing.
On this tame of a motor is the Edelbrock performer better or the Wieland Stealth the way to go?
Best street manifolds below 6500 rpm's.....
Weiand 8012 - Weiand Stealth Intake Manifolds - Overview - SummitRacing.com
Edelbrock 7166 - Edelbrock Performer RPM Intake Manifolds - Overview - SummitRacing.com
Either design will begin pulling at around 1,500 rpm's and will give you better mid-range than the low-rise standard Performer in my opinion.
Reply With Quote