Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Ford engine questions. Small block Ford
View Single Post
  #13 (permalink)  
Old 12-03-2012, 10:19 PM
greazyball greazyball is offline
Registered User

Last journal entry: studebaker m5
Last photo:
Join Date: Mar 2012
Posts: 82
Wiki Edits: 0

Thanks: 0
Thanked 4 Times in 3 Posts
i wanted to add,that i had 9.5 compression ratio on the cylinders.I had some cheapo brand X long tube headers with an H pipe all the exhaust was going thru 2'in and quarter exhust and cheapo glass packs.And the best part was when it was being dyno'd the tuning guy took a few minutes,timed the engine properly..i didnt,i had guessed at it..sounded good and smooth,So i must have been 'dead-on'..nope,He also changed out my 'champion' plugs for a set of autolites,tinkered with the gap and the pertronix..i picked up 11 horses right there in the dyno shop..all for the cost of 8 plugs
Reply With Quote