I'd like to convert my 355sbc to fuel injection on a budget. I've read about Mass-Flo systems and found that they use Ford mass air ecms. I did a little research and found this page http://www.fordmuscle.com/archives/2...sion/index.php
saying mallory made a line of distributor with TFI for ford v8s other than the 5.0/5.8's.
So that lead me to here http://www.malloryracing.com/AskTech...ID=6&ID=102205
So if its possible for the ecm to work with a chevy distributor the only thing left on my mind is that being a seqeuntial system would the ford ecm be programmed for the 302's firing order? I know some will say just use a chevy mass air system but 5.0s are a plentifull around here.