Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Frame work for installing a doors into a fibreglass T-Bucket body
Thread: Frame work for installing a doors into a fibreglass T-Bucket body
View Single Post
  #3 (permalink)  
Old 05-06-2012, 04:32 PM
boatbob2 boatbob2 is offline
boatbob2
Streetbeasts lawsuit donor
  
Join Date: Dec 2005
Location: north florida
Age: 75
Posts: 1,323
Wiki Edits: 0

Thanks: 5
Thanked 12 Times in 12 Posts
door....
on the inside of the T,take an oak 2x4 (or other HARD wood),shape it to the contour of the inside of T,(BELT SANDER) using,epoxt\y,glass it to back side of body,take a sabre saw,and cut door and wood out together,use the wood to put the hinges on.
Reply With Quote