Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - front disk breaks
View Single Post
  #6 (permalink)  
Old 12-06-2010, 12:12 PM
Chopt 48's Avatar
Chopt 48 Chopt 48 is offline
Registered User
Last photo:
Join Date: Oct 2005
Location: Toppenish, washington
Posts: 452
Wiki Edits: 0

Thanks: 0
Thanked 3 Times in 3 Posts
Well I can't edit and add it so here is another one I found when I came in for coffee and it gets down in the real low buck range except that the machine work on the spindles may run the cost up over the kit from the other vendor.

I saw your post after I poste this Richard and that link walks a person right though the process. The key to making the job easy is the spacers for the inner wheel bearings to adapt them to the spindles. They make it a no machine work deal.

Last edited by Chopt 48; 12-06-2010 at 12:35 PM.
Reply With Quote