Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - gm 4t60 conversion
View Single Post
  #1 (permalink)  
Old 07-05-2012, 01:34 PM
swlanewbie swlanewbie is offline
Registered User
Join Date: Jul 2012
Posts: 2
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
gm 4t60 conversion

hello, i am new to motoring. I am restoring a 1988 GRAND PRIX SE. I change the motor due to 2 cracked cylinders. After re-installation and a test drive, the Transmission 4t60(non 'e') started to have a clicking sound while driving or on stands. a scope on the valve case is where the clicking was coming. it sounded like the chain. now the question, can you take another trany from a 1990 'w' body car that has a 5 wire tcc connection and convert it to the 4 wire tcc connection that is in the car. the trany codes are, the 1988 trany is a 'CTH' which is 'w' body with a 2.8 ltr where the donner is 'YDH' which is a 'w' body with a 3.1 ltr. the cars wiring and computer only supports a 4 wire connection.
Reply With Quote