generation 2 bridge kit 230.00

heavy duty triangulated 4 link kit 330.00

2 Air Lift Dominator D2600 600psi baggs 1/2" ports

2 SMC 3/8" valves

2 3/8" valve fill control with PTC fittings

2 3/8" NPT valve dump control

a pump out of an air ride caddy, and 2 port 3 gal. tank

all parts from www.suicidedoors.com except pump and tank

so does this seem like a good suspension setup??

What vehicle?

1956 ford f100

That should hold up the rear well but if you plan to bag the front id get a bigger tank and better compressor.

cool thanks i do plan on bagging the front later do you know of a good kit for the front? doesnt it just need adapter plates and then you put bags right were the springs were? it has a 91 camaro clip

Should just be bags and cups and a shock relocation. Or you can go with shockwaves if you have the coin.

do you know of a good place to get cups? im getting everything else from suicidedoors.com

Might as well get em there. A front bag kit for an s10 should work good. Comes with cups, bags and a shock relocation kit.

ok sweet thanx for the help man