Have a 75 chevy k20 that I am putting a new motor in. So I have the motor out I decided to clean some things up and took off the tube billet grill(older) and cleaned inside the rad support. I am wanting to put a newer style billet grill in with the smaller bars or even like to find a nice original 75 grill to put back in. My problem is the brackets that hold this grill on seem to be homemade and I cant seem to find the brackets that I need to the left and right of the hood release. As far as I can tell these brackets allow the factory grill to screw into them and hold the grill on. I hope this is somewhat clear or someone gets what I mean. Does anyone have a pic of this, I will try to put some up of what I mean. Thanks Guys!