Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - having problems with new 383 stroker motor
View Single Post
  #13 (permalink)  
Old 05-30-2008, 02:59 PM
Mustangsaly's Avatar
Mustangsaly Mustangsaly is offline
Member
 
Last photo:
Join Date: Jan 2005
Location: Nebraska
Posts: 1,071
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
with the right compression & gears that cam shaft should work on the street. a friend build a vortec headed 350 with a GM 1 piece roller block and used a roller cam and 1.6 rocker arms GMPP HOT hydraulic roller, with 0.525/0.525 in. of lift and 218/228 of duration @ 0.050 in. of lift.


this went in a 65 nova with 4 speed and 373s and 10.1CR & a 750 holley. works great on the street. this came off that ryans dyno page
Reply With Quote