Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Engine (http://www.hotrodders.com/forum/engine/)
-   -   Header flange change (http://www.hotrodders.com/forum/header-flange-change-228960.html)

BODINE014 01-29-2013 06:11 PM

Header flange change
 
I got a buick 350 which im about to take out a put a sbc motor in i wanted to know if i could use my buick headers if i change the flage to a sbc so i wouldnt have no issues with clearance on the motor swap.

327NUT 01-30-2013 12:02 AM

1 Attachment(s)
Hard to say about the clearances but the Buick and Chevy share the same exhaust port configuration. I don't know how close the ports are off but with some good fabrication you should be able to change out the flange. Make sure you buy 3/8" thick flanges though, more material to weld to and less chances of warpage. You can find the flanges on ebay, I bought a nice set of 3/8" for $45...shipped.


All times are GMT -6. The time now is 06:53 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.